90 angle Peel Fixture
This fixture is designed for peel testing of tapes, films, foil seals, and other materials, per ASTM D6862 / D3330 /…
Dennison Wax Set
The Dennison wax sets are a reliable solution designed to evaluate the effects on the peel strength or surface strength…
COB_01 COBB TESTER
COB_01 COBB TESTER is used to test the absorbency of paper and cardboard according to related standards.
Coefficient of Friction Fixture
The G1086 COF fixture is an integral part of a COF measurement system, typically including a motorized test stand and…
ROUND SAMPLE PUNCH MANUAL
Preparation of round tissue, paper and board samples to determine the grammage.
ISOBARIC_401 Oxygen Transmission Rate Tester
ISOBARIC_401 Oxygen Transmission Rate Tester
Loop Tack Fixture
Designed for tack force testing of pressure-sensitive adhesives, in conformance with ASTM D6195 and related standards.
SAMPLE PUNCH PNEUMATIC
For the fast and practical pneumatic preparation of paper or board samples.
Cork Pull Fixture
This fixture is designed to extract a cork stopper out of a bottle for pull force measurements, in conformance with ISO…
SAMPLE PUNCH LARGE DIMENSIONS PNEUMATIC
For fast and practical pneumatic preparation of large dimension samples or A4 (210 x 297 mm) samples.
Pneumatic Peel Test Grip
Tensile testing of film, paper, and other thin materials
FCT Cutter
To prepare samples for the FCT (Flat Crush Test).
Wedge Grips
These heavy duty self-tightening grips with a capacity range of 50 lbf to 2,000 lbF (250 N to 9 kN) are ideal for…
CIRCULAR SAMPLE CUTTER MANUAL
To prepare round samples for the grammage determination.
Film and Paper Peel Test Grips
These grips are designed for film, paper, and other thin materials for tensile and peel testing, as per ASTM F88 and…
Cobb Tester
Measures water or oil absorption of paper and board surfaces per the Cobb method.
Compression Plates
These aluminum compression plates are ideal for testing springs, foams, and other materials.
COBB UNGER TESTER
For measuring the water or oil absorption of sized samples.
Compression Plates High Capacity
These high capacity compression plates are ideal for testing springs, foams, and other materials.
PUNCH and DIE CUTTER
To manually prepare sample strips for e.g. tensile tests.
Jacobs Chuck Pin Vise Grips
These grips are suitable for holding round samples such as wire or tubing. Three sizes are available.
PRECISION SAMPLE CUTTER
To prepare paper and board samples for the Elmendorf Tear Test or the Bending Stiffness Test.
3_point 4_point Bend Fixtures
This family of bend fixtures is designed for 3-point and 4-point bend testing of plastics, metals, ceramics, tubing…
DOUBLE BLADE CUTTER
To cut paper samples and even foil in one single operation – quick and precise.