LD_NT1 Medical Needle Tip Penetration Force Tester
The Medical Syringe Tip Penetration Force Tester is used to test the penetration force performance of syringe tips and…
CRUSH TESTER
To measure the compressive strength of board and corrugated board.
ECT SAMPLE SAW
To prepare very precise and exact corrugated board samples for the Edge Crush Test.
Laboratory Valley Beater
Valley-type laboratory beater for pulp refining ahead of handsheet forming and testing.
Carbon Dioxide Volume Tester
Carbon Dioxide Volume Tester
SOMERVILLE
To determine shives and other particles in pulp suspensions.
BST_01 Burst Strength Tester
BST_01 Burst Strength Tester
CONCORA MEDIUM FLUTER
To prepare corrugated samples for the CMT and CCT.
BST_02 Auto Burst Strength Tester
BST_02 Auto Burst Strength Tester
RESIN TESTER INDIVIDUAL SOLUTION
To determine the “caking” ability of resin.
Dennison Wax Set
The Dennison wax sets are a reliable solution designed to evaluate the effects on the peel strength or surface strength…
COB_01 COBB TESTER
COB_01 COBB TESTER is used to test the absorbency of paper and cardboard according to related standards.
ROUND SAMPLE PUNCH MANUAL
Preparation of round tissue, paper and board samples to determine the grammage.
ISOBARIC_401 Oxygen Transmission Rate Tester
ISOBARIC_401 Oxygen Transmission Rate Tester
SAMPLE PUNCH PNEUMATIC
For the fast and practical pneumatic preparation of paper or board samples.
LD_GPT 01 Gas Permeability Tester
LD_GPT-01 Gas Permeability Tester
SAMPLE PUNCH LARGE DIMENSIONS PNEUMATIC
For fast and practical pneumatic preparation of large dimension samples or A4 (210 x 297 mm) samples.
LD_203 Gas Permeability Tester
LD_203 Gas Permeability Tester
FCT Cutter
To prepare samples for the FCT (Flat Crush Test).
LD_GPT 03 Gas Permeability Tester
Gas Permeability Tester is applicable in the measurement of gas permeability rate, solubility coefficient, diffusion…
CIRCULAR SAMPLE CUTTER MANUAL
To prepare round samples for the grammage determination.
Cobb Tester
Measures water or oil absorption of paper and board surfaces per the Cobb method.
COBB UNGER TESTER
For measuring the water or oil absorption of sized samples.
PUNCH and DIE CUTTER
To manually prepare sample strips for e.g. tensile tests.