LD_NT1 Medical Needle Tip Penetration Force Tester
The Medical Syringe Tip Penetration Force Tester is used to test the penetration force performance of syringe tips and…
CRUSH TESTER
To measure the compressive strength of board and corrugated board.
ECT SAMPLE SAW
To prepare very precise and exact corrugated board samples for the Edge Crush Test.
DK_190 Headspace Gas Analyzer
DK_190 Headspace Gas Analyzer
Laboratory Valley Beater
Valley-type laboratory beater for pulp refining ahead of handsheet forming and testing.
Carbon Dioxide Volume Tester
Carbon Dioxide Volume Tester
Syringe Compression Fixture G1089
This fixture is designed to test compression force of a syringe plunger, as per ISO 7886-1 and other relevant standards.
SOMERVILLE
To determine shives and other particles in pulp suspensions.
BST_01 Burst Strength Tester
BST_01 Burst Strength Tester
Puncture Fixture for ASTM D5748
The G1110 is designed for determining the puncture resistance of plastic films and other materials up to 1,000 lbF (5…
CONCORA MEDIUM FLUTER
To prepare corrugated samples for the CMT and CCT.
BST_02 Auto Burst Strength Tester
BST_02 Auto Burst Strength Tester
Magness Taylor Food Texture Probes
G1122-1, G1122-2 These probes are designed for penetrating fruits, vegetables, and other foods, for determining…
RESIN TESTER INDIVIDUAL SOLUTION
To determine the “caking” ability of resin.
90 angle Peel Fixture
This fixture is designed for peel testing of tapes, films, foil seals, and other materials, per ASTM D6862 / D3330 /…
Dennison Wax Set
The Dennison wax sets are a reliable solution designed to evaluate the effects on the peel strength or surface strength…
COB_01 COBB TESTER
COB_01 COBB TESTER is used to test the absorbency of paper and cardboard according to related standards.
Coefficient of Friction Fixture
The G1086 COF fixture is an integral part of a COF measurement system, typically including a motorized test stand and…
ROUND SAMPLE PUNCH MANUAL
Preparation of round tissue, paper and board samples to determine the grammage.
ISOBARIC_401 Oxygen Transmission Rate Tester
ISOBARIC_401 Oxygen Transmission Rate Tester
Loop Tack Fixture
Designed for tack force testing of pressure-sensitive adhesives, in conformance with ASTM D6195 and related standards.
SAMPLE PUNCH PNEUMATIC
For the fast and practical pneumatic preparation of paper or board samples.
LD_GPT 01 Gas Permeability Tester
LD_GPT-01 Gas Permeability Tester
Cork Pull Fixture
This fixture is designed to extract a cork stopper out of a bottle for pull force measurements, in conformance with ISO…