Full Description
Adhesion Tester
X1003. Adhesion Tester (Standard) 0-3500 PSI (0-25MPa)
The Adhesion Tester will measure the adhesion bond strength of applied coatings on flat and curved surfaces by the tensile pull on a Dolly glued to the coating.
Supplied in an industrial Carrying Case with 5 Flat Dollies, Turbo Fuse Adhesive, Dolly Cutter, Heated Dolly Remover, Dolly Cleaning Tool, Dolly Plug. The Calibration Certificate with traceability to UKAS is an optional extra.
Compliant to ISO 4624, ISO 16276-1 and ASTM D4541.
Technical Specification
The adhesion is measured by the tensile pull on a Dolly glued to the coating surface. The force is applied through the centre of the Dolly by a hydraulically loaded pin. This ensures an exactly central point-loading of the force.
The maximum value achieved at pull-off is recorded by a reset needle that is easily read on the large scale of the pressure gauge.
Gauge accuracy ±1%FSD.
Models
| Available in the following Adhesion Tester models: |
| X1003 Standard 0–3500psi (0–25MPa) and |
| X1004 Right Angle 0–3500psi (0–25MPa) for testing the adhesion of coatings inside pipes with a minimum diameter of 150mm (6”). |
More from Paint Test Equipment
View all Paint Test Equipment products →
Coating Thickness Meter
C5001. Coating Thickness Meter. Includes Ferrous Probe 0–1000µm
USB Download Cable
The USB Download Cable enables the stored batches in the Coating Thickness Meter to be downloaded to a computer…
Ferrous Probes
CS301. Spare Ferrous Probe 0–1000μm (to fit C5001 & C5006 Coating Thickness Meters)
Non Ferrous Probes
CS304. Spare Non-Ferrous Probe 0–1000μm (to fit C5004 & C5006 Coating Thickness Meters)
Calibration Foils
F2001. Calibration Foils 0–1000µm (25, 50, 75, 125, 175, 250, 500, 750µm)
Zero Disk
Z1003. Spare Zero Disk Ferrous
Wet Film Gauge
W5001. Wet Film Gauge (aluminium) 25–2000μm (pack of 10)
Wet Film Gauges Plastic
The Wet Film Gauges Plastic ensures the quality control of the paint thickness while the coating is still wet.
Paint Inspection Kit
K3001. Paint Inspection Kit
Holiday Detector
S4001. Holiday Detector 0.5–6Kv. Includes High Voltage Handle
Broad Holiday Brush
SA502. Broad Brush 200mm (8”)
Circular Holiday Brush
SA302. Circular Brush & Assembly 2” (51mm)