MODEL 9526A Digital End Enamel Rater
The MODEL 9526A Digital End Enamel Rater is used to test for deficiencies such as poor enamel coating by detecting and locating metal exposure in ends. The 9526A provides an index of surface quality in terms of the amount of metal exposure by measuring current flow through the end and an…
Full Description
The MODEL 9526A Digital End Enamel Rater is used to test for deficiencies such as poor enamel coating by detecting and locating metal exposure in ends. The 9526A provides an index of surface quality in terms of the amount of metal exposure by measuring current flow through the end and an electrolyte.
Operation
An appropriate set of Change Parts, determined by the size and type of end being tested, is installed in the 9502. An end is seated on the Change Part and clamped in place. The assembly (filled with the electrolyte solution) is rotated upside down and a test sequence is initiated to determine the quality of the enamel coating on the sample. A direct reading of enamel coating quality is obtained from the front panel digital display.
Change Parts
This unit requires the use of Change Parts. Please see 9756 ; 9757 ; 9758 or 9759 for futher information.
Features
- DIGITAL DISPLAY OF RESULTS
- RS-232 COMMUNICATION CAPABILITY
- AUTOMATIC VOLTAGE REGULATION
- USES STANDARD ELECTROLYTES
- VACUUM CAPABILITY
- DETACHED END HOLDER FOR CORROSION PROTECTION
- TESTS WIDE RANGE OF ROUND AND NON-ROUND ENDS
- QUICK-MOUNT CHANGE PARTS
More from ALTEK Company TECH Products
View all ALTEK Company TECH Products products →
MODEL 9505A Mobility Tester
The MODEL 9505A Mobility/Lubricity Tester is used to determine the coefficient of friction of decorated or coated body…
MODEL 9505CD Mobility_ Lubricity Tester
The MODEL 9505CD Mobility / Lubricity Tester is used to determine the coefficient of friction of decorated or coated…
MODEL 9001HP and 9001LP Leak Tester for Food and Beverage Ends, Buckling Tester for Food Ends
The MODEL 9001HP Leak Tester allows beverage ends to be tested for leaks in the score and tab area.
9520 Calibrated Leakers
The MODEL 9520 Calibrated Leaker is a shell, a converted end, or a disc into which a small hole has been made; this…
MODEL 9009G Can Buckling Test Station for Beverage Cans
The MODEL 9009G Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
MODEL 9009C4 End Buckling Test Station for Beverage Ends
The MODEL 9009C4 End Buckling Test Station is used to determine the pressure at which an unseamed beverage end fails.
MODEL 9009C5 Can Buckling Test Station for Beverage Cans
The MODEL 9009C5 Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
9009F2 Can Buckling Growth Test Station for Beverage Cans
The MODEL 9009F2 Can Growth/Buckling Test Station is used to measure growth of the can relative to the internal…
9009H4 End Buckle_Tab Blowout_Vent Test Station for Beverage Ends
The MODEL 9009H4 End Buckle_Tab Blowout_Vent Test Station is used to determine the pressure at which unseamed beverage…
MODEL 9025A2 Paneling Tester for Food Utility Cans
The MODEL 9025A2 Paneling Tester tests the pressure at which a food/utility can will collapse or fail under external…
MODEL 9223BE2 Pop Tear Tester for Detachable or Non Detachable Tab Beverage Cans
The MODEL 9223BE2 Pop Tear Tester is used to determine the forces required to both "pop" the tab on a beverage end and…
MODEL 9212BE2 Pop or Tear Tester for Full Opening Ends
The MODEL 9212BE2 Pop Tear Tester is used to determine the forces required to first "pop" the score and then "tear" the…