MODEL 9223BE2 Pop Tear Tester for Detachable or Non Detachable Tab Beverage Cans
The MODEL 9223BE2 Pop Tear Tester is used to determine the forces required to both "pop" the tab on a beverage end and to pull the tab back. The 9223BE2 can also determine the force required to cause the tab or it's retaining rivet to abnormally fail.
Full Description
Description
The MODEL 9223BE2 Pop Tear Tester is used to determine the forces required to both "pop" the tab on a beverage end and to pull the tab back. The 9223BE2 can also determine the force required to cause the tab or it's retaining rivet to abnormally fail.
Operation
An appropriate set of Change Parts, determined by the sample type and size, are installed on the unit. A sample is placed in the Change Part and a hook is attached to the tab. The tab is then pulled to either determine the force required to "pop" the tab and then pull the tab back, or to break the tab or it's retaining rivet. At the conclusion of each test, failure forces are displayed on the front panel of the Digital Monitor.
Change Parts
This unit requires the use of Change Parts. Please see 9777 or 9783 for further information.
Features
- INDUSTRY STANDARD
- TESTS WIDE VARIETY OF ENDS
- 7 SAMPLE TEST ANGLES POSSIBLE
- AIR/HYDRAULIC CONTROL
- RELIABLE LOAD CELL DESIGN
- DIGITAL DISPLAY OF RESULTS
- RS-232 COMMUNICATION CAPABILITY
- AUXILIARY ANALOG OUTPUT
- WIDE RANGE OF CHANGE PARTS
More from ALTEK Company TECH Products
View all ALTEK Company TECH Products products →
MODEL 9505A Mobility Tester
The MODEL 9505A Mobility/Lubricity Tester is used to determine the coefficient of friction of decorated or coated body…
MODEL 9505CD Mobility_ Lubricity Tester
The MODEL 9505CD Mobility / Lubricity Tester is used to determine the coefficient of friction of decorated or coated…
MODEL 9001HP and 9001LP Leak Tester for Food and Beverage Ends, Buckling Tester for Food Ends
The MODEL 9001HP Leak Tester allows beverage ends to be tested for leaks in the score and tab area.
9520 Calibrated Leakers
The MODEL 9520 Calibrated Leaker is a shell, a converted end, or a disc into which a small hole has been made; this…
MODEL 9009G Can Buckling Test Station for Beverage Cans
The MODEL 9009G Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
MODEL 9009C4 End Buckling Test Station for Beverage Ends
The MODEL 9009C4 End Buckling Test Station is used to determine the pressure at which an unseamed beverage end fails.
MODEL 9009C5 Can Buckling Test Station for Beverage Cans
The MODEL 9009C5 Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
9009F2 Can Buckling Growth Test Station for Beverage Cans
The MODEL 9009F2 Can Growth/Buckling Test Station is used to measure growth of the can relative to the internal…
9009H4 End Buckle_Tab Blowout_Vent Test Station for Beverage Ends
The MODEL 9009H4 End Buckle_Tab Blowout_Vent Test Station is used to determine the pressure at which unseamed beverage…
MODEL 9025A2 Paneling Tester for Food Utility Cans
The MODEL 9025A2 Paneling Tester tests the pressure at which a food/utility can will collapse or fail under external…
MODEL 9212BE2 Pop or Tear Tester for Full Opening Ends
The MODEL 9212BE2 Pop Tear Tester is used to determine the forces required to first "pop" the score and then "tear" the…
MODEL 9221CA2 Axial Load Test Station for Light Weighted Beverage Cans
The MODEL 9221CA2 Axial Load Test Station is used to determine the load carrying capacity of light-weighted beverage…