MODEL 9025A2 Paneling Tester for Food Utility Cans
The MODEL 9025A2 Paneling Tester tests the pressure at which a food/utility can will collapse or fail under external pressure.
Full Description
The MODEL 9025A2 Paneling Tester tests the pressure at which a food/utility can will collapse or fail under external pressure.
Operation
An appropriate set of Change Parts, determined by the can type and size being tested, are installed in the unit. A sample is installed on the Change Parts and the test chamber is sealed. Air Pressure is applied to the outside of the sample until it fails; the failure pressure is indicated on the front-panel mounted digital display.
Change Parts
This unit requires the use of Change Parts. Please see 9794 ; 9794A ; 9794B ; 9856 ; or 9859 for further information.
Features
- MICROPROCESSOR CONTROL OF TEST FOR CONSISTENT RESULTS
- DIGITAL DISPLAY OF RESULTS
- RS0232 COMMUNICATIONS CAPABILITY
- EXTENSIVE SAFETY FEATURES
- TEST POINT FOR CALIBRATION
- CAN BE FITTED FOR NON-ROUND CANS
- CAN TEST ONE OR BOTH ENDS SEAMED
- SAMPLE CAN BE VIEWED DURING TEST
- AUXILIARY ANALOG OUTPUT (OPTIONAL)
More from ALTEK Company TECH Products
View all ALTEK Company TECH Products products →
MODEL 9505A Mobility Tester
The MODEL 9505A Mobility/Lubricity Tester is used to determine the coefficient of friction of decorated or coated body…
MODEL 9505CD Mobility_ Lubricity Tester
The MODEL 9505CD Mobility / Lubricity Tester is used to determine the coefficient of friction of decorated or coated…
MODEL 9001HP and 9001LP Leak Tester for Food and Beverage Ends, Buckling Tester for Food Ends
The MODEL 9001HP Leak Tester allows beverage ends to be tested for leaks in the score and tab area.
9520 Calibrated Leakers
The MODEL 9520 Calibrated Leaker is a shell, a converted end, or a disc into which a small hole has been made; this…
MODEL 9009G Can Buckling Test Station for Beverage Cans
The MODEL 9009G Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
MODEL 9009C4 End Buckling Test Station for Beverage Ends
The MODEL 9009C4 End Buckling Test Station is used to determine the pressure at which an unseamed beverage end fails.
MODEL 9009C5 Can Buckling Test Station for Beverage Cans
The MODEL 9009C5 Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
9009F2 Can Buckling Growth Test Station for Beverage Cans
The MODEL 9009F2 Can Growth/Buckling Test Station is used to measure growth of the can relative to the internal…
9009H4 End Buckle_Tab Blowout_Vent Test Station for Beverage Ends
The MODEL 9009H4 End Buckle_Tab Blowout_Vent Test Station is used to determine the pressure at which unseamed beverage…
MODEL 9223BE2 Pop Tear Tester for Detachable or Non Detachable Tab Beverage Cans
The MODEL 9223BE2 Pop Tear Tester is used to determine the forces required to both "pop" the tab on a beverage end and…
MODEL 9212BE2 Pop or Tear Tester for Full Opening Ends
The MODEL 9212BE2 Pop Tear Tester is used to determine the forces required to first "pop" the score and then "tear" the…
MODEL 9221CA2 Axial Load Test Station for Light Weighted Beverage Cans
The MODEL 9221CA2 Axial Load Test Station is used to determine the load carrying capacity of light-weighted beverage…