MODEL 9001HP and 9001LP Leak Tester for Food and Beverage Ends, Buckling Tester for Food Ends
The MODEL 9001HP Leak Tester allows beverage ends to be tested for leaks in the score and tab area. The MODEL 9001LP Leak & Buckling Tester is used to determine the buckling resistance of food/utility ends and to test for the presence of leaks in food/utility ends.
Full Description
The MODEL 9001HP Leak Tester allows beverage ends to be tested for leaks in the score and tab area. The MODEL 9001LP Leak & Buckling Tester is used to determine the buckling resistance of food/utility ends and to test for the presence of leaks in food/utility ends.
Operation
An appropriate set of Change Parts, determined by the type and size of a sample being tested, are installed on the unit. Two ends are placed in the Change Parts and sufficent pressure is applied to either buckle or pass/fail the ends. The water-filled chamber will also reveal leaks in the ends under test when pressure or vacuum is applied.
Change Parts
This unit requires the use of Change Parts.
The 9001HP uses 9837 Change Part.
The 9001LP uses any of the following Change Parts: 9748 ; 9749 ; 9750 ; and 9751.
Features
- GOOD VISIBILITY OF ENDS IN TEST
- REVEALS SMALL LEAKS
- LIGHTING HI-LIGHTS LEAKS
- TESTS UNDER PRESSURE AND VACUUM
- TESTS TWO ENDS AT A TIME
- SEPARATE GAUGE FOR EACH END
- LAZY HAND INDICATORS
- WIDE RANGE OF ROUND AND NON-ROUND CHANGE PARTS
More from ALTEK Company TECH Products
View all ALTEK Company TECH Products products →
MODEL 9505A Mobility Tester
The MODEL 9505A Mobility/Lubricity Tester is used to determine the coefficient of friction of decorated or coated body…
MODEL 9505CD Mobility_ Lubricity Tester
The MODEL 9505CD Mobility / Lubricity Tester is used to determine the coefficient of friction of decorated or coated…
9520 Calibrated Leakers
The MODEL 9520 Calibrated Leaker is a shell, a converted end, or a disc into which a small hole has been made; this…
MODEL 9009G Can Buckling Test Station for Beverage Cans
The MODEL 9009G Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
MODEL 9009C4 End Buckling Test Station for Beverage Ends
The MODEL 9009C4 End Buckling Test Station is used to determine the pressure at which an unseamed beverage end fails.
MODEL 9009C5 Can Buckling Test Station for Beverage Cans
The MODEL 9009C5 Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
9009F2 Can Buckling Growth Test Station for Beverage Cans
The MODEL 9009F2 Can Growth/Buckling Test Station is used to measure growth of the can relative to the internal…
9009H4 End Buckle_Tab Blowout_Vent Test Station for Beverage Ends
The MODEL 9009H4 End Buckle_Tab Blowout_Vent Test Station is used to determine the pressure at which unseamed beverage…
MODEL 9025A2 Paneling Tester for Food Utility Cans
The MODEL 9025A2 Paneling Tester tests the pressure at which a food/utility can will collapse or fail under external…
MODEL 9223BE2 Pop Tear Tester for Detachable or Non Detachable Tab Beverage Cans
The MODEL 9223BE2 Pop Tear Tester is used to determine the forces required to both "pop" the tab on a beverage end and…
MODEL 9212BE2 Pop or Tear Tester for Full Opening Ends
The MODEL 9212BE2 Pop Tear Tester is used to determine the forces required to first "pop" the score and then "tear" the…
MODEL 9221CA2 Axial Load Test Station for Light Weighted Beverage Cans
The MODEL 9221CA2 Axial Load Test Station is used to determine the load carrying capacity of light-weighted beverage…