9820 Change Part
The 9820 Change Part holds a straight wall can in place as it is being pressurized. The 9820 consists of a displacement plug over which the can is placed; an optional plug extender for use with a second height of can; a pair of jaws which clamp the sample in place against the displacement plug…
Full Description
The 9820 Change Part holds a straight wall can in place as it is being pressurized. The 9820 consists of a displacement plug over which the can is placed; an optional plug extender for use with a second height of can; a pair of jaws which clamp the sample in place against the displacement plug during testing and a seal assembly.
Ordering
The 9820 is ordered by specifying 9820, the can straight wall diameter, the can height, and second height (if applicable). Samples MUST be provided to ensure proper manufacture of the 9820 Change Parts.
Example
9820: 211 x 413 (SW dia, hgt)
Applicable Models
This change part is used with ALTEK Models: 9009B1 ; 9009C2 ; 9009C5 ; and 9009F2.
More from ALTEK Company TECH Products
View all ALTEK Company TECH Products products →
MODEL 9505A Mobility Tester
The MODEL 9505A Mobility/Lubricity Tester is used to determine the coefficient of friction of decorated or coated body…
MODEL 9505CD Mobility_ Lubricity Tester
The MODEL 9505CD Mobility / Lubricity Tester is used to determine the coefficient of friction of decorated or coated…
MODEL 9001HP and 9001LP Leak Tester for Food and Beverage Ends, Buckling Tester for Food Ends
The MODEL 9001HP Leak Tester allows beverage ends to be tested for leaks in the score and tab area.
9520 Calibrated Leakers
The MODEL 9520 Calibrated Leaker is a shell, a converted end, or a disc into which a small hole has been made; this…
MODEL 9009G Can Buckling Test Station for Beverage Cans
The MODEL 9009G Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
MODEL 9009C4 End Buckling Test Station for Beverage Ends
The MODEL 9009C4 End Buckling Test Station is used to determine the pressure at which an unseamed beverage end fails.
MODEL 9009C5 Can Buckling Test Station for Beverage Cans
The MODEL 9009C5 Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
9009F2 Can Buckling Growth Test Station for Beverage Cans
The MODEL 9009F2 Can Growth/Buckling Test Station is used to measure growth of the can relative to the internal…
9009H4 End Buckle_Tab Blowout_Vent Test Station for Beverage Ends
The MODEL 9009H4 End Buckle_Tab Blowout_Vent Test Station is used to determine the pressure at which unseamed beverage…
MODEL 9025A2 Paneling Tester for Food Utility Cans
The MODEL 9025A2 Paneling Tester tests the pressure at which a food/utility can will collapse or fail under external…
MODEL 9223BE2 Pop Tear Tester for Detachable or Non Detachable Tab Beverage Cans
The MODEL 9223BE2 Pop Tear Tester is used to determine the forces required to both "pop" the tab on a beverage end and…
MODEL 9212BE2 Pop or Tear Tester for Full Opening Ends
The MODEL 9212BE2 Pop Tear Tester is used to determine the forces required to first "pop" the score and then "tear" the…