9814 Change Part
The 9814 Change Parts hold a necked-in can in place as it is being compressed. The 9814 consists of a can locator with centering pin and an optional locator extender for use with a second height of can.
Full Description
The 9814 Change Parts hold a necked-in can in place as it is being compressed. The 9814 consists of a can locator with centering pin and an optional locator extender for use with a second height of can. The 9814 Change Parts are designed and manufactured to fit the neck contour of the sample EXACTLY in order to prevent neck failure during testing of the sample's side wall.
Ordering
The 9814 is ordered by specifying detailed information on the appropriate Customer Order Guide. The Customer Order Guide includes a cross-sectional diagram of a beverage can neck; the customer uses this diagram to provide to Altek specific sample information such as neck and flange contours and dimensions.
Applicable Models
This change part is used with ALTEK Models: 9221CA2 ; 9221CA3 ; 9221DA3 ; 9221DA4 ; and 9221DA5.
More from ALTEK Company TECH Products
View all ALTEK Company TECH Products products →
MODEL 9505A Mobility Tester
The MODEL 9505A Mobility/Lubricity Tester is used to determine the coefficient of friction of decorated or coated body…
MODEL 9505CD Mobility_ Lubricity Tester
The MODEL 9505CD Mobility / Lubricity Tester is used to determine the coefficient of friction of decorated or coated…
MODEL 9001HP and 9001LP Leak Tester for Food and Beverage Ends, Buckling Tester for Food Ends
The MODEL 9001HP Leak Tester allows beverage ends to be tested for leaks in the score and tab area.
9520 Calibrated Leakers
The MODEL 9520 Calibrated Leaker is a shell, a converted end, or a disc into which a small hole has been made; this…
MODEL 9009G Can Buckling Test Station for Beverage Cans
The MODEL 9009G Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
MODEL 9009C4 End Buckling Test Station for Beverage Ends
The MODEL 9009C4 End Buckling Test Station is used to determine the pressure at which an unseamed beverage end fails.
MODEL 9009C5 Can Buckling Test Station for Beverage Cans
The MODEL 9009C5 Can Buckling Test Station is used to determine the pressure at which the bottom dome of a beverage can…
9009F2 Can Buckling Growth Test Station for Beverage Cans
The MODEL 9009F2 Can Growth/Buckling Test Station is used to measure growth of the can relative to the internal…
9009H4 End Buckle_Tab Blowout_Vent Test Station for Beverage Ends
The MODEL 9009H4 End Buckle_Tab Blowout_Vent Test Station is used to determine the pressure at which unseamed beverage…
MODEL 9025A2 Paneling Tester for Food Utility Cans
The MODEL 9025A2 Paneling Tester tests the pressure at which a food/utility can will collapse or fail under external…
MODEL 9223BE2 Pop Tear Tester for Detachable or Non Detachable Tab Beverage Cans
The MODEL 9223BE2 Pop Tear Tester is used to determine the forces required to both "pop" the tab on a beverage end and…
MODEL 9212BE2 Pop or Tear Tester for Full Opening Ends
The MODEL 9212BE2 Pop Tear Tester is used to determine the forces required to first "pop" the score and then "tear" the…