Sheet Former — Manual & Pneumatic (TAPPI)
Manual and pneumatic TAPPI-standard handsheet former for standardized pulp testing.
Full Description
TAPPI
CODE: P.502.159.X
USAGE
For the production of standardized laboratory sheets.
DEVICE DESCRIPTION
The Sheet Former is intended for installation into a laboratory bench (not included). The individual stages are carried out by operating two hand levers. Swirling is done with an agitator with perforated bottom plate and the couching is done with a 10 kg stainless steel roller (both included in the delivery). Additionally, ten mirror polished plates and drying rings are included in the delivery. All parts are made of corrosion resistant material. Manual: The individual stages are carried out by operating two hand levers. Swirling is done with an agitator. Pneumatic: The individual stages as well as the swirling are carried out by three pneumatic switches.
FEATURES
- top quality materials and manufacturing
- only corrosion resistant materials
- easy to operate
- gravitational dewatering
- manual agitation by means of the agitation stirrer or by pneumatic switch
- couching by rolling the 10 kg stainless steel couching roll over the sheet
- inclusive couching plates, drying plates, drying rings and blotting paper starter pack
Specifications
| Standard | TAPPI |
|---|
Models
| Code | Model |
|---|---|
| P.502.159.M | TAPPI manual version |
| P.502.159.P | TAPPI pneumatic version |
| P.502.159.P.PAG | TAPPI pneumatic version with pneumatic couching device |
Applicable standards
TAPPI T205; ISO 5269/1; SCAN C26
More from PTE Pulp Test Equipment GmbH
View all PTE Pulp Test Equipment GmbH products →
AT 1000 wear parts set
for (original Einlehner) abrasion tester
Abrasion Tester AT 1000 TS (Einlehner)
Einlehner abrasion tester for determining the abrasiveness of pulp and stock suspensions.
UNIVERSAL MICROMETER
FOR PAPER, TISSUE, BOARD OR LEATHER USAGE To measure the thickness of paper, tissue, board or leather.
BENDING STIFFNESS TESTER
To determine the bending resistance and stiffness of paper and paperboard.
Bendtsen Tester
Measures paper roughness and air permeability using the Bendtsen method.
Double Seam Tester
Double folding strength test
Burst Tester
Measures the bursting strength of paper and board under controlled hydraulic pressure.
STATIC FRICTION TESTER
To measure the static friction between 2 materials in 2 directions.
TENSILE TESTER HORIZONTAL
To determine the tensile resistance in dry or wet state, elongation and tensile energy absorption (TEA) in paper or…
TENSILE TESTER_VERTICAL
To determine the force, tensile resistance, elongation and tensile energy absorption (TEA) in paper, board, tissue or…
FOLDING ENDURANCE TESTER
Determines the folding resistance of paper according to the Louis Schopper method.
Elmendorf Tear Tester
Determines the tearing resistance of paper, board and film using the Elmendorf pendulum method.